詳細信息

應用概述 General of applications

★該爐為通用性熱風加熱裝置，與各種物料的干燥設備配套使用?！?/p>

★該爐集燃燒與換熱為一體，以爐體高溫部位進行換熱的最新間接加熱技術。采取了耐高溫措施，從而使其壽命比管式熱風爐大大提高，輸出熱風溫度可達300℃以上，同時采用了煙氣逆向刷新換熱片和負壓吸式排煙方式，換熱部位不積灰、無須清理，熱性能穩定?？墒褂酶鞣N煤或木柴做燃料，并配有二次進風裝置，燃燒完全。各項技術指標均達國內先進水平。

★The furnace is universal hot air heating device and can be equipped with all kinds of drying equipment.

★The furnace integrates combustions and heat exchange in one body and adopts the newest indirect heating technique with high temperature of furnace body to carry out heat exchange and adopts measures of high temperature resistant too. Compared with pipe type hot air furnace, its life is raised greatly. The temperature of hot air to be transmitted may reach over 300℃.Meanwhile it adopts heat exchange sheet of conversed smoke and air and smoke exhausted way of negative pressure. So the part of heat exchange does not accumulate dust and not necessary to clean and the thermal property is constant. It can use different coal or as fuel. Because of equipped with secondary air in device, the combustion is fully.All technical indexes reach to domestic advanced level.

項目ltem 規格Specification	輸出熱量(104kcal/h) Heat capacity of output heat	輸出風量(m3/h) Air volume of output	熱風溫度(℃) T of hot air	耗煤量(kg/h) Consumption of coal	煙氣引風機型號 Model of exhaust smoke fan
JRF4-2.5	2.5-3	560-1500	60-200	10-12	炊事用鼓風機80-100W Blast fan for cooking 800-100W
JRF4-4	4-5	930-3500	60-200	14-17	炊事用鼓風機200-300W Blast fan for cooking 800-100W
JRF5-8	6-8	1480-5600	60-200	18-24	Y5-47 2.8c 1.1Kw
JRF5-15	10-15	2160-12000	60-300	30-45	Y5-47 4c 2.2Kw
JRF5-30	25-30	4330-25000	60-300	70-85	Y5-47 4c 3Kw
JRF5-60	55-60	8660-45000	60-300	150-175	Y5-47 4c 5.5Kw
JRF5-80	75-90	12500-83000	60-300	180-220	GY2-1 11w
JRF5-100	80-100	14400-84000	60-300	220-290	GY2-1 11kw
JRF5-160	120-160	23000-134000	60-300	410-460	Y9-26 9D 18.5Kw

所有參數僅作參考，視物料情況，本公司擁有變更權利，并不另行通知。

All datas are used for reference only. According to the condition of material, our factory has the right to change but not notice, pardon!

上一頁：GZL多功能整粒機

下一頁：JW擠條-拋圓微丸機組